Announcements
IMPORTANT: Cypress Developer Community is transitioning on October 20th. To learn more and be prepared for this change, check out our latest announcement.
cancel
Showing results for 
Search instead for 
Did you mean: 

USB Superspeed Peripherals

UserP1994
New Contributor II

Hello dears,

 

I would like to implement this example [https://www.cypress.com/documentation/application-notes/an75779-how-implement-image-sensor-interface... on my PCB, on my PCB there is CYUSB306X, and DS90UB960 deserializer with Omnivision camera Ox03A10, where could I make the necessary settings to take a picture/video like this example? thank you

 

 

https://www.cypress.com/documentation/application-notes/an75779-how-implement-image-sensor-interface...

0 Likes
1 Solution
Hemanth
Moderator
Moderator

Hi,

AN75779 demonstrates the usage of GPIF parallel interface to connect to Image sensor. But CYUSB306X does not have parallel interface instead has MIPI CSI-2 interface.

To achieve streaming using CYUSB306X please refer to AN90369

For CX3 example firmware you can refer to EZ-USB FX3 SDK\1.3\firmware\cx3_examples

(FYI: FX3 SDK can be downloaded here)

Regards,

Hemanth

View solution in original post

0 Likes
1 Reply
Hemanth
Moderator
Moderator

Hi,

AN75779 demonstrates the usage of GPIF parallel interface to connect to Image sensor. But CYUSB306X does not have parallel interface instead has MIPI CSI-2 interface.

To achieve streaming using CYUSB306X please refer to AN90369

For CX3 example firmware you can refer to EZ-USB FX3 SDK\1.3\firmware\cx3_examples

(FYI: FX3 SDK can be downloaded here)

Regards,

Hemanth

View solution in original post

0 Likes