cancel
Showing results for 
Search instead for 
Did you mean: 

USB Superspeed Peripherals

New Contributor II

Hi

we have used an FX3 and Type a Male connector before, There we have swapped an RX and TX lines in the connector to Fx3.

This time we have used a Type A receptacle (Female), Here we have to swap the RX and TX pins or not?

This Type A receptacle is connected to the PC (Like UVC output) by male to male Cable.

Thanks.

0 Likes
Reply
1 Solution
Moderator
Moderator

Hi,

The cable swaps RX and TX - so it need not be done on the device side.

Regards,

Hemanth

Hemanth

View solution in original post

1 Reply
Moderator
Moderator

Hi,

The cable swaps RX and TX - so it need not be done on the device side.

Regards,

Hemanth

Hemanth

View solution in original post