cancel
Showing results for 
Search instead for 
Did you mean: 

USB Superspeed Peripherals

GaK_4661021
New Contributor II

Hi,

I am using Windows host application for the UVC extension unit from UVC Extension unit here. I have taken firmware changes reference from CX3 UVC extension unit community thread. I am using CX3 SDK-1.3 and firmware example "cycx3_uvc_ov5640" for my experiment. When I test the UVC extension unit then it always returns an error with Error code: 0x80070492. However, I am able to stream the camera on my windows host machine. I have attached detailed error logs in attachement.

Can anyone help me that is there any configuration difference in the latest SDK for the UVC extension unit? Or Am I referring wrong host application example?

0 Likes
Reply
1 Solution
Rashi_Vatsa
Moderator
Moderator

Hello,

Please find the attached modified CX3 firmware which includes the functionality of Extension unit.

We have tested this with SDK 13.3 and 1.3.4 and it is working fine. Please test the same firmware at your end and let me know the results

Regards,

Rashi

Regards,
Rashi

View solution in original post

0 Likes
Reply
1 Reply
Rashi_Vatsa
Moderator
Moderator

Hello,

Please find the attached modified CX3 firmware which includes the functionality of Extension unit.

We have tested this with SDK 13.3 and 1.3.4 and it is working fine. Please test the same firmware at your end and let me know the results

Regards,

Rashi

Regards,
Rashi

View solution in original post

0 Likes
Reply