cancel
Showing results for 
Search instead for 
Did you mean: 

USB Superspeed Peripherals

PrN_4452166
New Contributor II

Hi Team

Unfortunately, we have swapped a MIPI_CLK+ and MIPI_CLK-

Is there any possibility that Cx3 has an option that differential pair lines can be swapped internally? 

 

 

MIPI_CLK.PNG Marked Nets are got swapped, 50th pin connected to MIPI_CLK+ and 52nd pin connected to MIPI_CLK-.

 

 

0 Likes
1 Solution
JayakrishnaT_76
Moderator
Moderator

Hello,

There is no provision to swap the MIPI lanes internally. 

Also, please refer to the following thread which mentions that MIPI differential lines should not be swapped:

https://community.cypress.com/t5/USB-Superspeed-Peripherals/Swapping-MIPI-signal-lines/m-p/127334

Best Regards,
Jayakrishna

View solution in original post

2 Replies
JayakrishnaT_76
Moderator
Moderator

Hello,

There is no provision to swap the MIPI lanes internally. 

Also, please refer to the following thread which mentions that MIPI differential lines should not be swapped:

https://community.cypress.com/t5/USB-Superspeed-Peripherals/Swapping-MIPI-signal-lines/m-p/127334

Best Regards,
Jayakrishna

View solution in original post

PrN_4452166
New Contributor II

Hi JayakrishnaT

Thanks for your quick response. 

0 Likes