- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi. Our company use CYUSB3014 for our product.
We purchased VID from USB-IF since the VID/PID from cypress can be used just for development (NOT for release).
The target OS is Windows 10 (10.0 build 19041)
To Add our VID/PID to driver, CyUSB.pdf which is document included on SDK said we should modify cyusb3.inf
and get catalog file. But, we have a problem while generating catalog file.
Here's what I did.
1. modify cyusb3.inf as below(located at C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\driver\bin\Win10\x64)
[Device.NTx86]
%VID_XXXX&PID_YYYY.DeviceDesc%=CyUsb3, USB\VID_XXXX&PID_YYYY ; add our VID/PID , (XXXX,YYYY : vid/pid from our company)
[Device.NTamd64]
%VID_XXXX&PID_YYYY.DeviceDesc%=CyUsb3, USB\VID_XXXX&PID_YYYY
[Strings]
VID_XXXX&PID_YYYY.DeviceDesc="OUR COMPANY PRODUCT NAME"
CYUSB3.GUID="{generated GUID key from Microsoft's Guidgen tool}"
2. Run the infverif.exe (latest version of ChkINF tool) to verify the modified INF file is error free
--> as a result, the Log showed INF file is not valid.
3. Run Inf2Cat.exe to re-generate the CAT file.
--> as a result, Unable to create CAT file.
I cannot proceed more because of the errors.
Is there a way I can fix these problem?
Solved! Go to Solution.
- Labels:
-
USB Superspeed Peripherals
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please provide the modified inf file for verification.
Regards,
Mallika
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please provide the modified inf file for verification.
Regards,
Mallika
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi. Mallika
To give you the modified inf file, I moved the files to the Desktop path and tried again.
And then I succeeded to get the Catalog file on this time.
Thankss Maillika
Maybe, the location of the inf file was the problem.
But, I still get a Error Message when I try with the infverif.exe.
Will this be a problem?
I attached my modified.inf file and cyusb3.sys file.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please recheck and ensure the inf file does not contain any Cypress VID/PID other than bootloader VID/PID of the device.
I can see some Cypress VID/PIDs in your inf file. Please modify.
Regards,
Mallika