I will develop the chip named CYUSB2014_BZXC,I use the vxworks system,I want to CYUSB2014_BZXC connect to USB.
Now,I want to know how to investigate somethings,which part of work need to do.
for example,I want to get descriptor of USB,how can I do,this chip how to use,Could someone can help me!!
The following is platform,I will develop the usb device driver software,by the way I use system named vxworks.
The driver software will run which part of item,the dirver will run Altera Arm or CYUSB2014-BXZC,and give me some details about development.
We recommend you to have a SuperSpeed explorer kit. We have a list of example projects available in the link - http://www.cypress.com/documentation/code-examples/usb-superspeed-code-examples
Also we have a text book that will help you write descriptors
I am glad to receive your response,I have some issues,the first one,I choose the chip named CYUSB2014-BXZC,where will the sdk and firmware install,PC,or CPU on my board.how to get the firmware from EEPROM,could you tell me the details.
\To get the firmware from EEPROM, the I2C Interface is used. For programming the EEPROM with firmware and to boot from EEPROM, please refer to this App Note.
I have downloaded the FX3 SDK kit,but I found [USB Control Center],which is nothing displaying,
The folloing pic is my [USB Control Center].I want to get some support,why the item display nothing.
I used the system named Vxworks,I want to know whether the FX3 SDK supports on Vxworks,If the SDK supports,and where the source link that I can get.
I need your help.Now I use the example "SRAMMaster",I need send or receive data from usb port to p-port.
I want to know how to use interface,which can send message to p-port when the usb connect is OK.
Can any one tell me to get boot loaded for CYUSB2014-BZXI for Linux OS. Which is similar to USB Control Center, Where I need to boot the CYUSB2014-BZXI and upload my firmware to EEPROM through linux os.