在使用FX3的slavefifo2bit固件的过程中,我的PC和FPGA可以进行通信,因此我想进行测试一下我的通信速度是多大
但是在使用streamer的时候发现,无法使用,请问我应该怎么修改才可以呢?
已解决! 转到解答。
那你就要找这两个固件的差异然后去修改streamer的source code了。 本身Slavefifo我们是个slave,你得保证打开了streamer之后GPIF那边一直有数据传过来才行。
USBBulkSourceSink这个固件的目录在哪? 我在FX3中没有找到
我想问一下 我用USBBulkSourceSink不影响我的FPGA吗 我的FPGA接口程序是按照slavefifo模式去设计的
在 2020-07-20 09:22:17,"YiZ_31" <community-manager@cypress.com> 写道:
|
|
Cypress Developer Community
|
|
streamer测速无法使用
reply from YiZ_31 in USB Low-Full-High Speed Peripherals - View the full discussion
你用USBBulkSourceSink这个固件进行测试。
Reply to this message by replying to this email, or go to the message on Cypress Developer Community |
Start a new discussion in USB Low-Full-High Speed Peripherals by email or at Cypress Developer Community |
Following streamer测速无法使用 in these streams: Inbox |
This email was sent by Cypress Developer Community because you are a registered user.
You may unsubscribe instantly from Cypress Developer Community, or adjust email frequency in your email preferences
|
|
我想问一下 USB3.0的传输速度和我使用的固件有影响吗?
因为涉及到和我FPGA接口设计原因,我自己使用的USB3.0的固件是slavefifo-2bit的,但是此时测速streamer就一直运行失败
但是使用USBBulkSourceSink 固件可以进行测速 但是貌似和我的FPGA没多大关系 因为此时我就没有烧录我的FPGA程序
非常奇怪
那你就要找这两个固件的差异然后去修改streamer的source code了。 本身Slavefifo我们是个slave,你得保证打开了streamer之后GPIF那边一直有数据传过来才行。