cancel
Showing results for 
Search instead for 
Did you mean: 

USB Low-Full-High Speed Peripherals

anga_4847821
New Contributor

I need breakout USB to UART interface module based on CY7C65213A.Do you have, kindly let me know. Can you clarify that Is there any module with CY7C65213A.I have seen the USB UART Serial Breakout- CY7C65213 but it is not suitable for RS485.So I want USB UART Serial Breakout with CY7C65213A.

Can you tell me the hardware difference of both IC's. Do you have the USB UART CY7C65213A breakout

0 Likes
1 Solution
YatheeshD_36
Moderator
Moderator

Hello Anil,

As discussed, the CY7C65213A part is pin compatible with the CY7C65213. Hence, any board that has a CY7C65213 IC can be replaced with corresponding pin-compatible CY7C65213A. 

Thanks,

Yatheesh

View solution in original post

0 Likes
3 Replies
YatheeshD_36
Moderator
Moderator

Hello,

CY7C65213 and CY7C65213A are pin compatible and there is no difference in hardware.

You can make use of CYUSBS232 RDK and replace the CY7C65213 IC on the RDK with CY7C65213A part. 

Thanks,

Yatheesh

0 Likes
anga_4847821
New Contributor

Dear Sir,

We gone through your message.But we want that breakout board have an IC of

CY7C65213A.Can you mount that IC and you will able supply to me means it is

OK for us or if you give CY7C65213A IC and breakout board with same rate

also ok. Because we are doing R&D ,So we can't afford the expenses.

Kindly let me know.

Regards

Anilkumar Galla

Scita Solutions

Bangalore

On Tue, Dec 29, 2020 at 2:25 PM YatheeshD_36 <community-manager@cypress.com>

0 Likes
YatheeshD_36
Moderator
Moderator

Hello Anil,

As discussed, the CY7C65213A part is pin compatible with the CY7C65213. Hence, any board that has a CY7C65213 IC can be replaced with corresponding pin-compatible CY7C65213A. 

Thanks,

Yatheesh

View solution in original post

0 Likes