cancel
Showing results for 
Search instead for 
Did you mean: 

USB Low-Full-High Speed Peripherals

Siva
New Contributor II

Hi can i program CY7C63813 with miniprog3 , if yes at how much frequency the STMCLK (pin 4) of ISSP header in Miniprog3 will run while programming the chip?

0 Likes
1 Solution
PranavaYN
Moderator
Moderator

Hi,

Miniprog3 can be used to program CY7C63813. 5 pin ISSP header to USB adapter would be required to program.

The maximum STMCLK frequency while programming will be 1.5MHz. 

Best regards,
Pranava

View solution in original post

0 Likes
1 Reply
PranavaYN
Moderator
Moderator

Hi,

Miniprog3 can be used to program CY7C63813. 5 pin ISSP header to USB adapter would be required to program.

The maximum STMCLK frequency while programming will be 1.5MHz. 

Best regards,
Pranava

View solution in original post

0 Likes