cancel
Showing results for 
Search instead for 
Did you mean: 

USB Low-Full-High Speed Peripherals

Anonymous
Not applicable

Hello,

   

I'm new to cypress products. I'm willing to adapt a board with a Cy7C64013C USB controller to new specifications.

   

First thing first : I need to find a way of programming it. I havn't found the hardware connection to use in its datasheet.

   

Also, is there a developpement Kit suitable for this componant?

   

thanks in advance.

   

 

   

Cyril

0 Likes
Reply
3 Replies
Anonymous
Not applicable

Hi,

   

Please see  http://www.cypress.com/?id=170&rtID=107.

   

Thanks

   

Prajith

0 Likes
Reply
Anonymous
Not applicable

Thanks for the information,

   

unfortunatly, the datasheet of the CY7C64013C didn't provided any information on which pins to use for the ISSP protocol.

   

Do I have to assume that as on the other component you joined, I have to use the P1[0] and P1[1] pins?

   

It seems unlikely that such an information wouldn't be diplayed in the datasheet.

   

Also, I'm still confused with starter Kits.

   

 

   

Regards

   

 

   

Cyril

0 Likes
Reply
Anonymous
Not applicable

 Cyril,

   

  Please see this link http://www.cypress.com/?rID=14317. You will have all the details here.

   

Thanks

   

Prajith

0 Likes
Reply