Hi we need to impliment the "lock" function on an SD kaart partition.with the Card’s "Internal Write Protection" mechanism.
I am not sure if it's been handeled inside the Cy driver or firmware of the FX3S
Is there anybody that implimented this ?
Help would very much be appreciated.
According to the SD card associasion manual :
"
The entire card may be permanently write
protected by the manufacturer or content provider by setting the permanent or temporary write protect
bits in the CSD. For cards which support write protection of groups of sectors by setting the
WP_GRP_ENABLE bit in the CSD, portions of the data may be protected (in units of
WP_GRP_SIZE sectors as specified in the CSD), and the write protection may be changed by the
application. The SET_WRITE_PROT command sets the write protection of the addressed write protect group,
and the CLR_WRITE_PROT command clears the write protection of the addressed
write-protect group. "
I assume the firmware needs to handle the low level interface while the driver needs to inrefcae between the firmware and User interface and/or file write/read handler.
