cancel
Showing results for 
Search instead for 
Did you mean: 

USB Low-Full-High Speed Peripherals

BoKr_4331921
New Contributor

Greetings everyone,

I'm looking into options, to use a Cypress Encore II, CY7C63813-PXC based device programmer under Linux, namely for using the flashrom Open Source utility (flashrom.org) for programming flash chips. I'd be interested to know if there's a native Linux driver for CY7C63813-PXC, to allow running flashrom Utility in combination with this tiny programmer:

Product designation: "NANO USB Programmer"

Mfg: HS-TECH R.O.K, Korea

MPN: NANOUSB001

Site: http://shop3.nanobios.cafe24.com/article/download/7/8/?page=1

USB IDs Database:

USB ID: 04b4:3813

Name: NANO BIOS Programmer

Link: https://usb-ids.gowdy.us/read/UD/04b4/3813

The programmer uses cyusb3.inf driver under Windows (XP/Vista/7/8/10). Windows driver corresponds to device, named »Cypress FX3 USB BootProgrammer Device«, as referred to on the drop-down menu in Windows Update Driver installation wizard.

Thank you in advance !

0 Likes
1 Solution
Sananya_14
Moderator
Moderator

Hello,

We dont have any linux drivers for Encore II which can be used with flashrom utility. Please check with Nano USB if they have any driver to communicate with the programmer on Linux..

Best Regards,

Sananya

View solution in original post

0 Likes
1 Reply
Sananya_14
Moderator
Moderator

Hello,

We dont have any linux drivers for Encore II which can be used with flashrom utility. Please check with Nano USB if they have any driver to communicate with the programmer on Linux..

Best Regards,

Sananya

View solution in original post

0 Likes