USB Low-Full-High Speed Peripherals

[ChHa_1252886]

Can I use a development kit CY3684 to debug the firmware for CY7C68014A-56PVXC?  The development kit uses the CY7C68013A-128AXC which also has access to the serial port  for the KEIL debugger.  I don't need all the functionality of the 128 pin part and the power consumption is also a benefit is the reason to use CY7C68014A-56PVXC

Thanks in Advance!

Chris

[YiZ_31 · Accepted solution]

Hi Chris,

Yes, you can. But you should move your code into the CY7C68014A-56PVXC project after debugging, they are not pin-to-pin devices.