cancel
Showing results for 
Search instead for 
Did you mean: 

USB Low-Full-High Speed Peripherals

Anonymous
Not applicable

I've been given the task of changing some usb buttons, and testing indicates that they use the enCoReII Keyboard RDK. Digging around, the documentation here indicates I need a PSoC MiniProg programmer and a 5-pin to USB interface adapter. Looking around further, I can't find any 5-pin to usb interface adapters and i'd rather not have to make one, so would I be able to re-program the button using the PSoC MiniProg 3? If not, is there another alternative?

0 Likes
Reply
3 Replies
SrikanthD_56
Employee

Hi,

You can use MiniProg3 to program the EnCoRe II device, but you still need the 5-pin to USB interface adapter to do so. I don't think there is an alternative for this.

Schematic for 5-pin to USB interface adapter can be found here.

0 Likes
Reply
Anonymous
Not applicable

Hmm, I see. Do you have any suggestions on where I should purchase the components to make it? This is really my first foray into this type of stuff, so i'm very inexperienced. Thank you for your response!

0 Likes
Reply
SrikanthD_56
Employee

Part number for 5-pin to USB interface adapter is CY3655-PLG. For convenience, you can try procuring one online (not sure of the availability in your region though).

0 Likes
Reply