I have no experience with cypress and want to program a USB FX2LP CY7C68013A. I read that with EZ-USB FX2LP USB2.0 Develope Board Logic Analyzer Module bought on ebay can be programmer. I dont know if there is an adapter for CY7C68013A with 56 pins or in what way do the connections between CY7C68013A pins and the programmer. I would also like to know if are some specific pins which must be used or if they are all chip pins.
There are 2 methods to program the FX2LP.
a) Download from USB - The code can be loaded onto FX2LP from the USB interface itself.
b) Boot from EEPROM- Once code development is complete, the binaries can be loaded onto EEPROM and then system can boot from the EEPROM.
The document below has the details:
I am not sure which is the programmer you are referring to on ebay, pass the link and i can do a quick check.