cancel
Showing results for 
Search instead for 
Did you mean: 

USB Low-Full-High Speed Peripherals

New Contributor

Hi Cypress

Whether  MCU support Windows update as below and attachment file for reference , Thank !!

(https://docs.microsoft.com/en-us/windows-hardware/drivers/install/updating-device-firmware-using-win...)

0 Likes
Reply
1 Solution
Moderator
Moderator

Hello,

We do not have any driver to support this feature.

Alternatively, you can automatically update the firmware on the FX2LP device using a script file.

Please refer to section "3.2 Automated Firmware Download" in AN50963.

Thanks,

Yatheesh

View solution in original post

0 Likes
Reply
5 Replies
Moderator
Moderator

Hello,

We do not have any driver to support this feature.

Alternatively, you can automatically update the firmware on the FX2LP device using a script file.

Please refer to section "3.2 Automated Firmware Download" in AN50963.

Thanks,

Yatheesh

View solution in original post

0 Likes
Reply
Contributor

Hi Yatheesh,

Could submit script, driver files, and INF file to WU?

Then this application may can go through WU for firmware upgrade.

Reference: Working with Extension INFs in the Windows Hardware Dashboard - Windows drivers | Microsoft Docs

Thanks,

Mitchell

0 Likes
Reply
Moderator
Moderator

Hello Mitchell,

Yes, your custom driver package can be submitted for windows update.

Please note that none of the Cypress VID/PID should be submitted to WU.

Thanks,

Yatheesh

0 Likes
Reply
Contributor

Hi Yatheesh,

Yes, customer VID/PID will put in C0 load of EEPROM.

Please help hint, if something need to be care.

Thanks,

Mitchell

0 Likes
Reply
Moderator
Moderator

Hello Mitchell,

The drivers that is bound to the device both "before and after the script file" is loaded "should not" contain any Cypress VID/PID, if the drivers are going to be pushed for windows update. Please make sure that this is checked.

Thanks,

Yatheesh

0 Likes
Reply