cancel
Showing results for 
Search instead for 
Did you mean: 

USB Low-Full-High Speed Peripherals

Anonymous
Not applicable

i have simple board with a CY7C65213-28PVXI chip on it

driver / chip vid & pid changed from the defaults, driver re-signed properly

board plugged into new PC via motherboard USB2 native port - device detected, driver installed when pointed at new files and the 2 devices ( MFG also ) appear as expected and all is happy.

unplug the cable and plug it into a different port on the same machine and only the first end point enumerates but then sits there with a code 10 error message from the driver.  possibly correlating to being in a USB 3 port now

this appears to happen on at least 2 different PCs

any thoughts anyone?

thanks

Andy

0 Likes
1 Solution
Sananya_14
Moderator
Moderator

Hello Andy,

-Please try uninstalling the driver and manually reinstalling it again.

- Could you please attach a screenshot of the device manager when the error occurs?

Best Regards,

Sananya

View solution in original post

0 Likes
1 Reply
Sananya_14
Moderator
Moderator

Hello Andy,

-Please try uninstalling the driver and manually reinstalling it again.

- Could you please attach a screenshot of the device manager when the error occurs?

Best Regards,

Sananya

View solution in original post

0 Likes