cancel
Showing results for 
Search instead for 
Did you mean: 

USB Hosts Hubs Transceivers

DeKe_2275631
New Contributor

Since CYUSB3KIT-001 board is not in stock, and CYUSB3KIT-003 claims to not support OTG option (User Guide ->page 29, Firmware Examples->Note), I wondered if there is any other suitable kit to test out FX3 Host functionality? Especially, communication with MSC devices (usb memory sticks and such). Thanks in advance.

(Also, why AN77960 document is obsolete? I couldn't find any newer version.)

0 Likes
1 Solution
Anonymous
Not applicable

Cypress provide only CYUSB3KIT-001 and CYUSB3KIT-003 DVKs for Fx3.

   

But, CYUSB3KIT-003 does not support OTG functionality because the OTG pin of the FX3 is left unconnected. 

   

You can also check with Pactron (our design partner) to check whether they have FX3 Dev Kit with OTG support.

View solution in original post

0 Likes
1 Reply
Anonymous
Not applicable

Cypress provide only CYUSB3KIT-001 and CYUSB3KIT-003 DVKs for Fx3.

   

But, CYUSB3KIT-003 does not support OTG functionality because the OTG pin of the FX3 is left unconnected. 

   

You can also check with Pactron (our design partner) to check whether they have FX3 Dev Kit with OTG support.

View solution in original post

0 Likes