USB EZ-PD™ Type-C Forum Discussions
text.format{('custom.tabs.no.results')}
Hello,
I have a computer that is equipped with Adoptium JAVA 64 bits.
Eclipse is working well but EZ PD protocol analyzer is not launching .
Error is: Caused by: java.lang.ClassNotFoundException: javax.annotation.PreDestroy cannot be found by org.eclipse.e4.core.di_1.6.100.v20170421-1418
Is there a way to make EZ PD protocol analyzer working with a non Oracle JAVA distribution?
Show LessHi,
We are using CYPD3176 in a sink application and read the “EZ-PD™ Barrel connector replacement (BCR) FAQs - KBA231336” in the knowledge based articles. It was mentioned in question 16 that to support legacy USB, “It is recommended that ISNK_COARSE + ISNK_FINE ≥ 0.9 A and ISNK_COARSE + ISNK_FINE ≤ 1.5 A to attain the broadest interoperability with legacy chargers.” But since we also need to support PD3.0 also would this setting affect the PD contract?
Thanks for the help.
Show LessHi,
If a legacy USB C charger(BC1.2, QC2.0 or a USB-A port) is connected to the CYPD3176 BCR-Plus, is there a way to know the voltage and current capability of the charger through i2C or other means? We know that for PD chargers we can get the info from CURRENT_PDO but cannot find the corresponding registers from the HPI manual.
Thanks!
Show Less
As we known, the CFP package is pin to pin compatible with TI PD controller for host application
Could you please provide us Infineon and TI part number - pin to pin comparison table?
Show LessIn the datasheet of CYPD8125-48LDXI, it is mentioned on Page 12 under 2.4.5.5:
“These gate drivers do not meet the Fast Role Swap (FRS) timings per the PD spec, hence an external load switch is recommended for applications that require FRS support"
We need to perform role swap but not fast role swap. Can we use the internal gate drivers in this case?
Thank you.
Show LessHello.
I'd like to know detail HPI register about BCR-Plus.
Below is HPI register in BCR HPI Utility user guide.
I don't find detail document. Let me know if anyone know link or data.
Regards.
Robert.
Show Less
你好,我刚购买的一块CY4500板子,下载了EZ-PD Protocol Analyzer Utility,但是电脑并没有检测到cy4500的驱动。我看社区上说,最新版是不用额外下载驱动的。根据在社区内看到的消息,我找到了winusb.sys并尝试了选择手动更新驱动,但是还是不成功。
Show Less
Hello Infineon support,
Thank you for your usual support.
My customer want to get ibs file of CCG7D.
Are the following files publicly available?
.s*p/.lib/.ibs file
Best regads,
Koki
Show LessHi Infineon Community,
Thank you for your usual support.
My customer want to use CCG7D for their next product for automotive.
Before their development, they want to use Evaluation kit.
Does CCG7D have Evaluation KIT??I don't find CCG7D EVK in website.
Best regards,
Koki
Show Less