USB EZ-PD™ Type-C Forum Discussions

你好，我刚购买的一块CY4500板子，下载了EZ-PD Protocol Analyzer Utility，但是电脑并没有检测到cy4500的驱动。我看社区上说，最新版是不用额外下载驱动的。根据在社区内看到的消息，我找到了winusb.sys并尝试了选择手动更新驱动，但是还是不成功。

Hello Infineon support,

Thank you for your usual support.

My customer want to get ibs file of CCG7D.

Are the following files publicly available?

.s*p/.lib/.ibs file

Best regads,

Koki

Hi Infineon Community,

Thank you for your usual support.

My customer want to use CCG7D for their next product for automotive.

Before their development, they want to use Evaluation kit.

Does CCG7D have Evaluation KIT??I don't find CCG7D EVK in website.

Best regards,

Koki

Hello

Regarding the current consumption listed in the attached data sheet, please let me know the value when the conditions are different as shown below. Please tell us about the current consumption of the power supply below.

Q1）What is the current consumption value when VDDD=3.3V in active mode?

Q2）What is the current consumption value when VBUS=5V in sleep mode?

Best Regards

Hello

Regarding the current consumption listed in the attached data sheet, please let me know the value when the conditions are different as shown below. Please tell us about the current consumption of the power supply below.

Q1）What is the current consumption value when VDDD=3.3V in active mode?

Q2）What is the current consumption value when VBUS=5V in sleep mode?

Best Regards

1. The datasheet describe about VBUS_P_CTRL :

The VBUS_P_CTRL pin of CCG6 has an in-built VBUS monitoring circuit that can detect OVP and UVP on VBUS.

2. if CCG6 work as power sink role,  CCG6 won't monitor VBUS volatge and detect OVP / UVP, right?

Hello Support.
Thank you for your usual support.

I have question about CCG7D.

I want to use CCG7 PD port as DRP.
Can CCG7 port use as DRP??

best regards,
Koki

Hi,

I have an unique PD charging (source) CCG3PA application where if the GPIOs detect a certain condition, PD charging (including the based 5V profile) is completely disabled. My first idea is call "dpm_stop(port);" when the condition is met, and then call "dpm_start(port);" when the condition is no longer true. However, I am not sure if this is the best way without other MCU functions (such as continuous monitoring of the GPIOs) having negative effects. Can you please let me know the best way to disable PD source charging when a condition is met, but it wouldn't hinder/disable other MCU capabilities?

Thanks,
Jon