cancel
Showing results for 
Search instead for 
Did you mean: 

USB EZ-PD Type-C

Anonymous
Not applicable

I want to develop a product with the following criteria:

1) USB C, UFP (USB client)

2) The product will be powered so I want to perform a PR_SWAP to provide +5v to the DFP

3) The product will remain an UFP from a data perspective (USB client)

Can I perform the above with a CCG2?  If so, which MPN?

Bryan

0 Likes
1 Solution
ShifangZ_26
Moderator
Moderator

Hi Bryan,

You could realize it with CCG2 and the firmware example with notebook. The MPN can be CYPD2122-24LQXI. Of course, CCG3 CYPD3125 also can be realized it.

Best Regards,

Lisa

View solution in original post

0 Likes
2 Replies
ShifangZ_26
Moderator
Moderator

Hi Bryan,

You could realize it with CCG2 and the firmware example with notebook. The MPN can be CYPD2122-24LQXI. Of course, CCG3 CYPD3125 also can be realized it.

Best Regards,

Lisa

View solution in original post

0 Likes
falu_294486
New Contributor

Hi Lisa,

   you say CYPD3125 also can be realized power source, did you have example?

my project need swap power source and power sink (and my device remain an UFP)

thanks

Faco

0 Likes