Type-C to DisplayPort (with PD Source)

Announcements

Live Webinar: USB-C adoption. Simple & Cost-efficient solutions | April 18th @9am or 5pm CEST. Register now !

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
HiOm_1802421
Level 5
Level 5
Distributor - Marubun (Japan)
50 replies posted 50 questions asked 25 replies posted

Dear all,

 

I'm thinking of a solution to add a Type-C to DisplayPort monitor.

That port needs the function to charge connected devices while receiving DisplayPort in alternate mode.

When I searched the reference design, I found a "Type-C-DisplayPort Cable" using CCG3.

But it was Sink, not PD Source.

 

Can I achieve this solution by making the following changes based on the "Type-C-DisplayPort Cable" and "Power Bank" reference designs?

-Port the Provider path of "Power Bank" to "Type-C to DisplayPort Cable".

-Replace CYPD3120 of "Type-C to DisplayPort Cable" to CYPD3121.

-Use the CCG3 Monitor Project of the EZ-PD Configuration Tool.

 

Best Regards,

Hidekazu Omoi

0 Likes
1 Solution
Pranava_YN
Moderator
Moderator
Moderator
100 likes received 500 replies posted 250 solutions authored

Hi,

Yes, the reference design chosen and steps mentioned are correct. Please refer to the blog post on this topic - https://community.cypress.com/t5/Resource-Library/CCG3-Type-C-receptacle-DRP-Reference-Design-Power-...

Best regards,
Pranava

View solution in original post

0 Likes
1 Reply
Pranava_YN
Moderator
Moderator
Moderator
100 likes received 500 replies posted 250 solutions authored

Hi,

Yes, the reference design chosen and steps mentioned are correct. Please refer to the blog post on this topic - https://community.cypress.com/t5/Resource-Library/CCG3-Type-C-receptacle-DRP-Reference-Design-Power-...

Best regards,
Pranava
0 Likes