USB EZ-PD Type-C

[SuEl_4525861]

Hi All,

We are trying to Develop PD100Watt and PD 60Watt(with PD3.0 and PPS) and USB-A(QC compatible) with using CCG3PA(CYPD3171-24LQXQ) for power bank application.

Kindly provide with reference design of  PD100Watt and PD60 Watt Design.

Any help will be appreciated. Thank you in advance.

Thanks & Regards

- Himavanth Reddy

[ShifangZ_26]

Hi ,

Currently, all of power bank reference design is listed as below. Please noticed that the 100W limitation is not on CCG3PA, you need make sure the PMIC have capabilities to support 100W.

https://www.cypress.com/documentation/reference-designs/ez-pd-ccg3pa-usb-cppsusb-charging-power-hub-...

https://www.cypress.com/ccg3pa-45w-power-bank-reference-design-using-southchip

https://www.cypress.com/documentation/reference-designs/ez-pd-ccg3pa-usb-cpps-power-bank-solution-us...

Best Regards,

Lisa

[SuEl_4525861]

Hi,

Thank you for your reply.

I found reference designs for 80W PD with USB-A and PD45Watt with USB-A, which is not helpful for us, Is there any reference design for PD100Watt with USB-A?. if so, Kindly provide more detail about that design.

Thanks & Regards

- Himavanth

[ShifangZ_26 · Accepted solution]

Hi Himavanth,

The CY4532 is designed for 100W PD with USB-A, you can refer details schematic from the link: https://www.cypress.com/file/411271/download

Best Regards,

Lisa