We use the CCG4 in our dock design, but need to add a billboard controller as well. We are using the EC/HPI I2C interface to communicate to our central MCU and we don't need the full DMC functionality so we don't want to use the design used in the CCG4 dock ref design. Is there a guide on how to integrate e.g. CY7C65210 with CCG4 in a way that it does not conflict with the EC/HPI interface?
Keep CY7C65219 + CCG4 can achieve the goal. CY7C65210 cannot avoid the conflict, since CY7C65210 is supporting HPIv1. But the latest CCG4 is supporting HPIv2.
Did you have any comments of the previous reply? We would need a Billboard control that doesn't conflict with the existing CCG4 <> EC communication. Is the source code available for the billboard controller? Shouldn't be that hard to change it from a I2C master to a I2C slave?
But with the CCG4 HPIv2 interface, the CCG4 is slave and our EC-controller is I2C master. If we add the CY7C65219, wouldn't that require that CY7C65219 is the I2C master? That will not work for us. What are the options then to add Billboard function?