How to program CCG2 via I2c

Announcements

Live Webinar: USB-C adoption. Simple & Cost-efficient solutions | April 18th @9am or 5pm CEST. Register now !

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
GrCa_1363456
Level 6
Level 6
50 likes received Beta tester First comment on KBA

What document discusses which I2C the boot loader is accessible thru and what address you need to communicate with to update the firmware. I see lots of documents that discuss it can be done, but none specifically telling you which I2C to connect with and how to address it.

My application is connecting an MCU directly to the I2C port of CYPD2122-24LQXI. I'm not using a serial bridge or MIniprog.

Greg

0 Likes
1 Solution
YatheeshD_36
Moderator
Moderator
Moderator
750 replies posted 500 replies posted 250 solutions authored

Hello,

Programming CCGx with I2C through I2C bootloader follows Cypress HPI spec.

You can get the spec under NDA. Please contact the local FAE to get the NDA signed.

Best Regards,

Yatheesh

View solution in original post

0 Likes
1 Reply
YatheeshD_36
Moderator
Moderator
Moderator
750 replies posted 500 replies posted 250 solutions authored

Hello,

Programming CCGx with I2C through I2C bootloader follows Cypress HPI spec.

You can get the spec under NDA. Please contact the local FAE to get the NDA signed.

Best Regards,

Yatheesh

0 Likes