cancel
Showing results for 
Search instead for 
Did you mean: 

USB EZ-PD Type-C

HsCh_3227321
New Contributor

Hi

I can't find where can i  config when the Voltage of VBus exceed to the 20V.

In the usb-pd sepc

未命名.png

The Bits10..9 must be changed when the Vbus voltage exceeds 20V.

Could this function to be added in the updated EZ-PD configuration Unity?

Thanks.

John

0 Likes
Reply
1 Solution
ShifangZ_26
Moderator
Moderator

Hi John,

The Cable VDO you show up is based on PD3.0 SPEC. But CCG2 is support PD2.0. CMG1 (The next E-Marker Cable chip) support PD3.0.

PD2.0 can be download from:http://www.usb.org/developers/powerdelivery/USB_PD_v2.0_011317.zip

Best Regards,

Lisa

View solution in original post

0 Likes
Reply
1 Reply
ShifangZ_26
Moderator
Moderator

Hi John,

The Cable VDO you show up is based on PD3.0 SPEC. But CCG2 is support PD2.0. CMG1 (The next E-Marker Cable chip) support PD3.0.

PD2.0 can be download from:http://www.usb.org/developers/powerdelivery/USB_PD_v2.0_011317.zip

Best Regards,

Lisa

View solution in original post

0 Likes
Reply