cancel
Showing results for 
Search instead for 
Did you mean: 

USB EZ-PD Type-C

New Contributor

Hello

I connected CCG1 and CCG2 with reference to Evaluation Kit Guide P.22, but the device of CCG2 is not displayed.

https://www.cypress.com/file/159241/download

CCG2.png

Is there a solution?

Best Regards

Sai

0 Likes
Reply
1 Solution
Moderator
Moderator

Hello Sai,

Could you please check the steps mentioned in Section 3.8.2 of the CCG2 kit User Guide? For the CCG1 host and client board connections, please refer to section 3 and 4 in the User Guide.

Please also attach a screenshot of the device manager for us to see if the USB-Serial device is coming up properly on the PC.

Best Regards,

Sananya

View solution in original post

0 Likes
Reply
1 Reply
Moderator
Moderator

Hello Sai,

Could you please check the steps mentioned in Section 3.8.2 of the CCG2 kit User Guide? For the CCG1 host and client board connections, please refer to section 3 and 4 in the User Guide.

Please also attach a screenshot of the device manager for us to see if the USB-Serial device is coming up properly on the PC.

Best Regards,

Sananya

View solution in original post

0 Likes
Reply