- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
In section 10.4.1 (Control of VBUS Provider Path and VBUS Consumer Path) of the Hardware Design Guidelines for the DRP Applications Using EZ-PD USB Type-C Controllers (AN210403), the circuitry shows a series of transistors without any list of specific components. What are the actual components for Q1, Q5, Q6, and Q16 on this page?
Thanks,
Hal
Solved! Go to Solution.
- Labels:
-
USB EZ-PD Type-C
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Hal,
Yes, the firmware for CYPD4225 is specific to the CY4541 EVK hardware and hence VBUS_P_CTRL_P1 is active high but VBUS_C_CTRL_N_P1 is active low. If you want these to be configured differently, please refer to config.h and pdss_hal.c files in the firmware as these are set using the pd_internal_pfet_on(), pd_inetrnal_cfet_on() APIs.
For CCG4M firmware examples, you could refer to the KBA since they arent included in the Host SDK.
Best Regards,
Sananya