Announcements
IMPORTANT: Cypress Developer Community currently doesn’t allow sign-in to prepare for the upcoming transition. To learn more, check out our announcement.
cancel
Showing results for 
Search instead for 
Did you mean: 

USB EZ-PD Type-C

td83
New Contributor II

Hello,

I am looking for the tool to configure the device CYPD5225.

I have downloaded the software PSoC Creator 4.4, but i was not able to find the component CYPD5225 in this tool !

What is the tool to configure the registers on the CYPD5225 ?

What is the tool to generate the HEX file mention in the document "CCGx (CYPDxxxx) Programming Specifications" Document Number: 002-22328 Rev. *G ?

I have the tool to download the HEX file to the CYPD5225 device but not the tool to generate the HEX file.

Thank you for help,

Best regards,

td83

0 Likes
1 Solution
ShifangZ_26
Moderator
Moderator

Hello td83,

 

1. You can select read from firmware file to get configurations of the binaries, and then review/change the configurations via Ez-PD configuration Utility. But, you need a .hex or .cyacd file which is matching the hardware design you are working on. 

2. You could get .hex/.cyacd from the folder if you have been installed any SDK or Kit from www.cypress.com

For example, CCG5 hex files:

...(installed path)\Cypress\EZ-PD CCGx Host SDK\CCGx\Firmware\binaries

ShifangZ_26_0-1623803627355.png

 

3. If your hardware design is not match our reference design/Applications hardware on Datasheet, you have to generated .hex/.cyacd files by PSoC Creator based on example codes have been offered in SDK. And Ez-PD configuration Utility will generated .c file for your project and then you could replace config.c in PSoC Creator directly.

Best Regards,

Lisa

View solution in original post

0 Likes
3 Replies