cancel
Showing results for 
Search instead for 
Did you mean: 

USB EZ-PD Type-C

Augustine_Yeh
New Contributor

Hi Cypress

We don't use the CYPD5225-96BZIT ADP_DETECT / K5 Pin function , Can you tell Us how to connect it in hardware ( pull high or pull low when we don't use it) , It is reference from intel Titan Ridge  design , Thank!!

pastedImage_0.png

0 Likes
Reply
1 Solution
ShifangZ_26
Moderator
Moderator

Hello,

If you are not going to use ADP_DETECT, please kindly add a 100K pull-down to ground, so that you can use the official release firmware directly.

Best Regards,

Lisa

View solution in original post

0 Likes
Reply
2 Replies
Sananya_14
Moderator
Moderator

Hello,

The OVP_TRIP_P1 pin can be left unconnected if not used since its an output pin.

Best Regards,

Sananya

0 Likes
Reply
ShifangZ_26
Moderator
Moderator

Hello,

If you are not going to use ADP_DETECT, please kindly add a 100K pull-down to ground, so that you can use the official release firmware directly.

Best Regards,

Lisa

View solution in original post

0 Likes
Reply