cancel
Showing results for 
Search instead for 
Did you mean: 

USB EZ-PD Type-C

JaGh_4384761
New Contributor

I downloaded & installed CCGx SDK files, config utility, creator, programmer etc. Then when I downloaded zip files of CCG3PA reference designs, I get a "Loading configuration Error" if I try to open HEX file from 45W car charger reference design or try to open CYACD file from 45W notebook reference design. I open these file using configuration utility 'read from firmware file' option. I'm running the latest version. I have no hardware connected to the computer at the moment. Generated messages are attached. Thank you this will help me a great deal.

John

0 Likes
1 Solution
YatheeshD_36
Moderator
Moderator

Hello,

Please use the EZ-PD configuration utility build 258 (setup) from the archives link which reads the .hex and the .cyacd file without error.

Best Regards,

Yatheesh

View solution in original post

0 Likes
2 Replies
YatheeshD_36
Moderator
Moderator

Hello,

Please use the EZ-PD configuration utility build 258 (setup) from the archives link which reads the .hex and the .cyacd file without error.

Best Regards,

Yatheesh

View solution in original post

0 Likes
JaGh_4384761
New Contributor

To anyone reading it and has the same issue, I had the version 267 installed prior to taking the above suggestion and it worked like a charm. Thank you YatheeshK_36

0 Likes