- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello
They want to use CYPD3171-24LQXQ without PD function and only with Power-SINK. In this case, Please tell me the setting to disable the PD function.
Or there any method to disable the PD function?
Best Regards
Mac/Arai
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
What is the thing that customer really want to do?
Even if CCG3PA is PD contracted, CCG3PA can send RDO as 5V/0.1A (0.5 Wattage) at the minimum to the Source.
Obviously, 5V/1.5A, 5V/3A, etc Sink PDO is also able to set for CCG3PA.
In addition, if the power source is not a PD compliant (does not send Source Capability, etc.), PD negotiation obviously does not start.
If they still would not like to have a PD function on the CCG3PA side, they need to modify the CCG3PA Firmware or request Cypress to develop the specific Firmware.
Best regards,
Hirotaka Takayama