cancel
Showing results for 
Search instead for 
Did you mean: 

Traveo

Anonymous
Not applicable

Dear Cypress support team,

Our company works in the ISP field and we are able to develop the

programming algorithm for many devices, also from Cypress/Spansion

manufacturer. For example, we developed the driver for the F²MC-16FX

family, PSoC® 1 devices, FCR4 Family etc. Now we have an important

project for the S6J32EELTM. We downloaded all the documentation from

your website but we could not find any information regarding how to get

access to the device via JTAG. Is there any detail specification for

this protocol?

Thank you very much for your support.

Best ragards,

Luca

--

/Luca Zanuttini

/Software and Firmware Engineer

Algocraft Srl

Via Giovanni Agnelli 1

33083, Villotta di Chions (PN)

phone: +39 0434-630415

e-mail: luca.zanuttini@algocraft.com

<mailto:debora.piccirillo@algocraft.com>

web: www.algocraft.com <http://www.algocraft.com/>

Twitter <https://twitter.com/algocraft?lang=en>Facebook

-


This email and any files transmitted with it are confidential and

intended solely for the use of the individual or entity to which they

are addressed. If you are not the named addressee you should not

disseminate, distribute or copy this e-mail. Please notify the sender

immediately by e-mail if you have received this e-mail by mistake and

delete this e-mail from your system. E-mail transmission cannot be

guaranteed to be secured or error-free as information could be

intercepted, corrupted, lost, destroyed, arrive late, incomplete or

contain viruses. The sender therefore does not accept liability for any

errors or omissions in the contents of this message, which arise as a

result of e-mail transmission. Please note that any views or opinions

presented in this email are solely those of the author and do not

necessarily represent those of the company.

0 Likes
Reply
1 Solution
HongyanW_86
Moderator
Moderator

Detailed Jtag specifications required signed NDA to share. Please kindly contact Cypress Franchised Distributors (http://www.cypress.com/cypress-franchised-distributors ) or create a technical support case on Cypress website.

View solution in original post

0 Likes
Reply
2 Replies
HongyanW_86
Moderator
Moderator

If using Jtag to program S6J3200 series MCU, please use User Mode shown below (S6J3200 series hardware manual: http://www.cypress.com/file/332246/download )

pastedImage_0.png

In addition, you can refer to the flashloader example included in IAR installation folder for programming via Jtag interface (eg. IAR Systems\Embedded Workbench 8.0\arm\src\flashloader\Cypress\FlashS6J3xx).

0 Likes
Reply
HongyanW_86
Moderator
Moderator

Detailed Jtag specifications required signed NDA to share. Please kindly contact Cypress Franchised Distributors (http://www.cypress.com/cypress-franchised-distributors ) or create a technical support case on Cypress website.

View solution in original post

0 Likes
Reply