Microcontrollers Forum Discussions
Browse the Community
PSoC™ 6
Discussion forum regarding PSoC™ 6 - 32-bit Arm Microcontroller (MCU) Forum, discusses the 40-nm technology - best combination of ultra-low-power consumption, flexibility, security and high-performance topics.
PSoC™ 4
PSoC™ 4 - Arm®-based Forum, discusses the low-power Cortex®-M0 and Cortex®-M0+ cores, CapSense®, and Bluetooth® Low Energy
PSoC™ 5, 3 & 1
The PSoC™ 5LP, PSoC 2 and PSoC 1 Forum discusses - 24-bit Digital Filter Block (DFB), 24 UDBs, DMA controller and integrating AFE, digital logic with user interface ICs with an Arm Cortex-M3 CPU solutions.
CAPSENSE™ & MagSense
The Sensing Technology Forum discusses CAPSENSE™ - capacitive-sensing and MagSense inductive-sensing for consumer, industrial, automotive, and Internet of Things (IoT) applications.
XMC™
AURIX™
In this forum you can post your questions, comments and feedback about the 32-bit AURIX™ TriCore™ Microcontroller. The AURIX™ offers the highest scalability in performance, memory & peripherals across application. It is a safe and secure companion chip, meeting both the ISO functional safety standards and EVITA full security standards. Here you can also find the links to the latest board pages, SW and Tools GitHub, trainings, documents and FAQs
TRAVEO™ T2G
Discussion forum regarding 32-bit TRAVEO™ T2G Microcontroller - based on ARM® for automotive body electronics applications; cutting-edge performance, safety, and security features topics.
MOTIX™ MCU
The MOTIX™ MCU forum is designed for you to post your questions, comments and feedback about the famous Embedded Power ICs at anytime. Ask your technical questions or explore existing content!
Legacy microcontrollers
Featured Discussions
Hi, I am using the Psoc 4100 s max microcontroller in which CY8C4149AZI-S598 mcu used. Can you please help in finding out which pins we can configure for SPI communication in this microcontroller. I am unable to find out these and also dont have pinout diagram for that.
Show LessGreetings,
Kindly provide the TLE5012B (GMR BASED ANGLE SENSOR) and TLE49681M (HALL SENSOR) Zero position programming for our reference to work.
I procured these sensor from Infineon last week.
Kindly send me the file for the programming.
Show LessHello,
we are trying to extend the example code https://www.infineon.com/dgdlc/en?dcId=8a8181663431cb50013431cb500b0000&downloadTitle=mcd_demo_basic_120412.zip&download=L2RnZGwvbWNkX2RlbW9fYmFzaWNfMTIwNDEyLnppcD9maWxlSWQ9ZGIzYTMwNDMxZWQxZDdiMjAxMWY0NjlhYzQwZTU2YWY= to work with a locked device. We tried different ways to supply the device key but no way worked. Is there a example code that sets the device_key and unlocks a device or any documentation on how to do that?
Show LessSir,
Kindly provide the algorithm/programming for circuit protection( over current, over voltage, over temperature, under voltage) of the TLE9879 eval kit.
This will useful to work for us with the eval kit which we procured from INFINEON.
Regards
pgm
Show LessThanks for anyone who access my problem. How can Mulitcore access same variable in the same time When using Tricore TC389 with Hightec IDE?
I had put memset() in core0,core1,core2,core3's while(1), to set an large array to diffrent content. There is nothing error or unexcept happen. I just can see the var jump between different number, Dose infineon did some basework in tricore? Is this a safety way to access variables in multicore ?
Do you have any manual to explane this questions? Please give me a demo that show how to access variables in multicore in safety way.
Show LessHello Team,
I walk through the TC375XX tricore infineon Micro safety manual, I see lot of internal and external software and hardware safety mechanisms.
My understanding is that the Internal and external safety mechanisms would be implemented and prevented against the safety Goal. I would like to know what the MCU safety Goal are or is there any Assumptions of use case considered? please clarify.
Regards,
Nallusamy
Dear Forum:
I do many test, I find the following phenomenon:
Before set MCU to Deep Sleep,
If I don't clear the SSR(serial status register) bit before close SPI,
MCU(PSoC6) can't enter deepsleep.
If I clear the SSR(serial status register) bit before close SPI,
MCU(PSoC6) can enter deepsleep.
I want to confirm:
does the SPI SSR bit affect MCU deepsleep or not.
Thank you.
Show Lesshi
could anyone tell me if the LMU data will be reset after Mcu was reset by TC35584?
or which memory area can keep unchanged after reset by 35584 apart from the NVM(DF and HSM ...) ?
Show Less
-
TraveoII
UART buadrate Setting
by chandan1995 Jun 19, 2023