TRAVEO™ T2G Forum Discussions
The customer's current application is Tilting three wheel, with three brushless motors, each with a power of approximately 1kw. they are using three independent MCUs and drivers, and looking for a more integrated solution to save costs. and need to use the MCUs of the car specifications. Do we have a suitable recommendation for Aurix and Travo II?
Hello,
I'm trying to run JTAG boundary scan on a Traveo T2G CYT2B73BADQ0AZSGS.
I am currently not getting any response from the device on its JTAG port.
Has anybody managed to run boundary scan tests on this device. Is there any configuration that I need to enable in order for boundary scan to run.
Thanks
Show LessHello,
I am curious to know does IAR IDE, programmer tools support in Linux(Debian)OS.
I know its not a right forum to ask here.
It would be really helpful to know this.
Thanks
Kiran
Show LessHi Team,
cy_stc_tcpwm_counter_config_t const MyCounter_config =
{
.period = 15625 - 1, // 15,625 / 15625 = 1s
.clockPrescaler = CY_TCPWM_PRESCALER_DIVBY_128, // 2,000,000Hz / 128 = 15,625Hz
.runMode = CY_TCPWM_COUNTER_CONTINUOUS,
.countDirection = CY_TCPWM_COUNTER_COUNT_UP,
.debug_pause = 0uL,
.CompareOrCapture = CY_TCPWM_COUNTER_MODE_COMPARE,
.compare0 = 0,
.compare0_buff = 0,
.compare1 = 0,
.compare1_buff = 0,
.enableCompare0Swap = false,
.enableCompare1Swap = false,
.interruptSources = CY_TCPWM_INT_NONE,
.capture0InputMode = CY_TCPWM_INPUT_LEVEL,
.capture0Input = 0uL,
.reloadInputMode = CY_TCPWM_INPUT_LEVEL,
.reloadInput = 0uL,
.startInputMode = CY_TCPWM_INPUT_LEVEL,
.startInput = 0uL,
.stopInputMode = CY_TCPWM_INPUT_LEVEL,
.stopInput = 0uL,
.capture1InputMode = CY_TCPWM_INPUT_LEVEL,
.capture1Input = 0uL,
.countInputMode = CY_TCPWM_INPUT_LEVEL,
.countInput = 1uL,
.trigger0EventCfg = CY_TCPWM_COUNTER_OVERFLOW,
.trigger1EventCfg = CY_TCPWM_COUNTER_OVERFLOW,
};
What change need to be done to configure it to a Free Run Timer
Thanks,
Pradeep
In the end, the target array is still all zeros
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/TRAVEO-T2G/cyt4fbb7-%E4%BD%BF%E7%94%A8mdma%E5%A4%8D%E5%88%B6%E6%95%B0%E7%BB%84%E6%B2%A1%E6%9C%89%E6%88%90%E5%8A%9F%E6%98%AF%E4%B8%BA%E4%BB%80%E4%B9%88/td-p/724114
Show LessNow I am currently working I2C driver by using cyhal_i2c_master_mem_read() and cyhal_i2c_master_mem_write() it was worked fine and what my question is it possible to use those function in I2C handler using interrupt...??
Show LessCYT4DN in this series, I need to use PCM-PWM interface but I couldn't able to see the HAL Driver for this. PFA Image below or where else I could able to find these HAL driver for PCM-PWM.
Show Less