cancel
Showing results for 
Search instead for 
Did you mean: 

Traveo II

tali_4848921
New Contributor

Hello

  Please tell me how to configure I2S Driver with 2 Tx Channel and 1 Rx Channel.

  My chip : CYT4BF.

Thank you.

 

0 Likes
1 Solution
HongyanW_86
Moderator
Moderator

TX and Rx of I2S channel can be configured and used independently. Please refer to I2S routine in SDL 6.6 for specific configuration. Please note that TX and Rx of the same channel share the same clock (MCLK).

I2S channel的TX和RX都是可以独立配置和使用的,具体配置请参考我们的SDL 6.6中的i2s例程。请注意同一个channel的TX和RX共用一个时钟(MCLK)。

Best regards,

Amy

View solution in original post

0 Likes
2 Replies
Pranith
Moderator
Moderator

Hello @tali_4848921 ,

Could you let me know if you are using the sample driver library (SDL) and the version?

Regards,

Pranith

0 Likes
HongyanW_86
Moderator
Moderator

TX and Rx of I2S channel can be configured and used independently. Please refer to I2S routine in SDL 6.6 for specific configuration. Please note that TX and Rx of the same channel share the same clock (MCLK).

I2S channel的TX和RX都是可以独立配置和使用的,具体配置请参考我们的SDL 6.6中的i2s例程。请注意同一个channel的TX和RX共用一个时钟(MCLK)。

Best regards,

Amy

View solution in original post

0 Likes