Flashing Issue CYT2B75CAE

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
SuAg_4382401
Level 1
Level 1
First like received

While flashing .hex file using SEGGER JFlash, I am getting an error. Below is the error description-

I am getting "Timeout while erasing sectors, RAMCode did not respond in time", while erasing or flashing and blank checking.

and also what is blank checking?

----------------------------------------------------------------

- Start of erasing sectors

- Blank checking 0x10000000 - 0x1001FFFF

- ERROR: Timeout while blank checking, RAMCode did not respond in time. (PC = 0x7BEB7BFB, CPSR = 0x967BFC7D, LR = 0x01000003)!

- ERROR: Failed to blank checking.

Failed to execute RAMCode for blank check!

- ERROR: Error while blank checking.

- Erasing range 0x10000000 - 0x1001FFFF (  4 Sectors, 128 KB)

- ERROR: Timeout while erasing sectors, RAMCode did not respond in time. (PC = 0x7BEB7BFB, CPSR = 0x967BFC7D, LR = 0x81000003)!

- ERROR: Failed to erase sectors.

- End of erasing sectors

- ERROR: Erase failed

- Start of restoring

- End of restoring

- ERROR: Failed to auto program target

Disconnecting ...

- Disconnected

------------------------------------------------------------------------------------

Thannks

Sumit

0 Likes
1 Solution

Hello,

Kindly download latest JFlash from Segger website (currently v6.48a). JFlash V6.47e still didn't fully support our Traveo II MCU.

SEGGER - The Embedded Experts - Downloads - J-Link / J-Trace

SubhenduS_91ycbu

Best regards,

Amy Wang

View solution in original post

0 Likes
6 Replies
lock attach
Attachments are accessible only for community members.
SuAg_4382401
Level 1
Level 1
First like received

Probable cause could be wrong device selection as CYT2B9 instead CYT2B7 while flashing(once). does this affect?

Please suggest on this.

0 Likes

The device ID of CYT2B9 and CYT2B7 is different and need to be selected correctly.

--Amy Wang

0 Likes

But now, it is not flashing using corrected id.

could you tell me what could have gone wrong?

please suggest.

0 Likes

I have attached the issue that I am facing in reply to the post.

0 Likes

Hello,

Kindly download latest JFlash from Segger website (currently v6.48a). JFlash V6.47e still didn't fully support our Traveo II MCU.

SEGGER - The Embedded Experts - Downloads - J-Link / J-Trace

SubhenduS_91ycbu

Best regards,

Amy Wang

0 Likes

Hi Amy

I tried that, but it showing the same issue with latest Jflash.

Mistakenly I flashed CYT2B75CAE with CYT2B95CAE device selected once

Initially it was flashing fine.

Please suggest on this.

Regards

Sumit

0 Likes