cancel
Showing results for 
Search instead for 
Did you mean: 

Sensing Technologies

setec_869301
New Contributor

I checked HW is ok, Vcc is stable and outputs 18.8V, Vdd is 3.3V, I2C speed is lower than 100kHz, all timings are checked and OK, no line crossing. Pin 12 CS2/GUARD that also works as AXRES is +3.3V. Still after 0x2FFF trials, no ACK. Any idea?

Schematic is attached.

0 Likes
Reply
1 Solution
setec_869301
New Contributor

Hi: I found the problem. The I2C address is 0x37 and I assumed 0x55 although it was decimal 55 (0x37).

View solution in original post

0 Likes
Reply
1 Reply
setec_869301
New Contributor

Hi: I found the problem. The I2C address is 0x37 and I assumed 0x55 although it was decimal 55 (0x37).

View solution in original post

0 Likes
Reply
Top labels