cancel
Showing results for 
Search instead for 
Did you mean: 

SRAM

BrZh_4762551
New Contributor

I searched datasheet and know that 'D' and 'A' means different process technology, but what 'S' means in the part CY7C1061DV33-10ZSXI ?

Can they two parts be used samely?

0 Likes
1 Solution
KaKi_1384211
Honored Contributor

Hi,

CY7C1061AV33-10ZXI and CY7C1061DV33-10ZSXI can from the pinout, PKG, specs and truth table be used in the same way.

However, please carry out your evaluation sufficiently.

Thanks and regards,

View solution in original post

5 Replies
BrZh_4762551
New Contributor

I made a mistake,  it should be CY7C1061AV33-10ZXI   and   CY7C1061DV33-10ZSXI

0 Likes
KaKi_1384211
Honored Contributor

Hi,

CY7C1061AV33-10ZXI and CY7C1061DV33-10ZSXI can from the pinout, PKG, specs and truth table be used in the same way.

However, please carry out your evaluation sufficiently.

Thanks and regards,

View solution in original post

BrZh_4762551
New Contributor

Hello Kaki,

I checked both datasheets and found that, the only difference is that CY7C1061AV33-10ZXI has a higher Maximum Operating Current and Maximum CMOS Standby Current due to its lagging process technology, pls see attached pictures. Is CY7C1061DV33-10ZSXI compatible with CY7C1061AV33-10ZXI  ?  Many thx!CY7C1061AV33.pngCY7C1061DV33.png

0 Likes
KaKi_1384211
Honored Contributor

Hi,

Yes, your understanding is correct.

The standby current of CY7C1061DV33-10ZSXI is lower than that of CY7C1061AV33-10ZXI, so I think it is easier to evaluate.

Thanks and regards,

0 Likes