- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
According to Document Number: 001-79552 Rev. *O,POD is supported at VDDQ voltages of 1.1 V and 1.2 V nominal,Now customer's main-controller Intel Stratix 10 sx FPGA can just use POD 1.2V signaling,but CY7C4042KV13-933FCXC is a commercial part,in Operating Range we can see it can just use VDDQ=1.1V,if can CY7C4042KV13-933FCXC works with 1.2V VDDQ ?
BTW,If we must change to Industrial part,Now we can't find a registrable P/N,Please help advise, Many Thanks!
Solved! Go to Solution.
- Labels:
-
Memory SRAM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Both Industrial and Consumer parts can support VDDQ = 1.1v and 1.2V, you can just go ahead use the Consumer part with 1.2v VDDQ.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Both Industrial and Consumer parts can support VDDQ = 1.1v and 1.2V, you can just go ahead use the Consumer part with 1.2v VDDQ.