Example code associated with CYW943907AEVAL1F EVK User Guide
- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
Attached to this post are three examples that are specific for CYW943907AEVAL1F EVK.
These examples are briefed in the CYW943907AEVAL1F EVK User Guide.
Please refer to "2.2 Install Software" section of the same User Guide on how to add them.
Chapter "5. Code Examples" briefs about the same examples in the User guide.
- Tags:
- 43907 user guide
- cy943907aeval1f_kitpackage.zip
- cyw43907
- cyw943907aeval1f
- cyw943907aeval1f user guide
- kitpackage.zip
- wireless mcu
- Subscribe to RSS Feed
- Mark Article as New
- Mark Article as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
I found "?" icon, while trying your CY943907AEVAL1F_KitPackage.zip with WICED-Studio-6.0.1.5 on Linux. Is it OK? Or should I fix it?
- Subscribe to RSS Feed
- Mark Article as New
- Mark Article as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
can i use any other instaed of WICED_BUTTON1 in the irq_enable
- Subscribe to RSS Feed
- Mark Article as New
- Mark Article as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
There are two user buttons on CYW943907AEVAL1F viz, WICED_BUTTON1 and WICED_BUTTON2, you can use either. As kavs has clearly stated in this blog, he has provided some example applications and you can modify the applications as per your requirement.
- Subscribe to RSS Feed
- Mark Article as New
- Mark Article as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
HI ricatmp1
I mean can we use any gpio for connecting my sensor other than BUTTON1 & BUTTON2 and raise a event when my sensor activated....
- Subscribe to RSS Feed
- Mark Article as New
- Mark Article as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
Ya you can enable any other GPIO for your use... Refer datasheet of CYW943907AEVAL1F for pin description...
- Subscribe to RSS Feed
- Mark Article as New
- Mark Article as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
THANK YOU for your response
wiced_gpio_input_irq_enable( WICED_BUTTON1,IRQ_TRIGGER_RISING_EDGE, setpoint_control_keypad_handler, NULL );
in the above function instead of WICED_BUTTON1 can i use any other GPIO. I used WICED_GPIO_44 but it is giving error. How to enable that WICED_GPIO_44 for which my sensor is connected. when my sensor is activated it has to publish data
- Subscribe to RSS Feed
- Mark Article as New
- Mark Article as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
The API wiced_gpio_input_irq_enable (wiced_gpio_t gpio, wiced_gpio_irq_trigger_t trigger, wiced_gpio_irq_handler_t handler, void *arg) enables an interrupt trigger for any input GPIO pin that is used in the function so you can use any other GPIO instead of WICED_BUTTON1.