PSoC™ Creator & Designer Forum Discussions

I am resuming the discussion of a topic that has been closed: 

Compile for multiple targets 

I am very grateful for the solution provided by Len_CONSULTRON , since it allows to ease the maintenance of same code to be targeted to different silicon devices, avoiding to have duplicate files everywhere.

I have found that there are however two source files for which the suggested method does not work and therefore they need to exist as duplicates (even if 1:1 identical) in each new project. These are:

• the schematic (.cysch)
• the file "cyapicallbacks.h" (if it exists in the project, i.e. if user code has been implemented in some Component's generated source code (Macro Callbacks)).

For the latter (cyapicallbacks.h) it seems that referring to the same file in the first project does not work: PSoC Creator seems to ignore its presence. 
I have experienced this with PSoC Creator 3.3.

Besides the little annoyance with these two files, the method suggested by Len_CONSULTRON works great with all the other source files.

Have a nice day 😊 

Ever wish you could use one of the standard 2x16 character displays across multiple ports or not have to use sequential pins?  Well now you can spread the connections to your character LCD across multiple ports in any order.  This new component is 100% compatible with the original Character LCD, except you can connect it any way you want.  One other little feature is that you only need 6 GPIOs instead of 7.  So check out the CharLCDmp.  You can also use it with the standard port 2 connector, but make sure you drive the R/W pin to Vss.

The attachment contains a workspace with a demo project and a library with both the CharLCDmp component and a LCD annotation component to help you remember how to connect the two together.

Enjoy,

Mark

Hello All

Referring to a similar post titled "Build process unable to delete contents of code gen dir. Error: Failed to delete...lcpsoc3" i can confirm that this appears to be a glitch on Windows 10 (10.0.16299 b16299) - unsure if the originator of the previous thread was also on a Win10 domain environment where group policy may be coming into play???

Occasionally the lcpsoc3 directory located inside codegentemp becomes inaccessible and can not be deleted - a restart of Win10 is required after which the folder is no longer present in codegentemp. This issue does not appear related to permissions as a permission change cannot be applied to the codegentemp folder - see images further down this post. Attempting to copy the entire project folder is also met an error in Win10.

The same PSoC Creator 4.1 project was previously rebuilt several times. The only change made in creator was to change clocks, example of the Output window below.

Has anyone encountered this oddity, any ideas on addressing?

Kind regards

Greg

Flash used: 11144 of 262144 bytes (4.3%).

SRAM used: 2873 of 65536 bytes (4.4%). Stack: 2048 bytes. Heap: 128 bytes.

--------------- Build Succeeded: 01/10/2018 09:10:46 ---------------

--------------- Build Started: 01/10/2018 09:23:15 Project: MB-01_Bootloadable, Configuration: ARM GCC 5.4-2016-q2-update Debug ---------------

cydsfit.exe -.appdatapath "C:\Users\greg\AppData\Local\Cypress Semiconductor\PSoC Creator\4.1" -.fdsnotice -.fdswarpdepfile=warp_dependencies.txt -.fdselabdepfile=elab_dependencies.txt -.fdsbldfile=generated_files.txt -.fdsreffile=referenced_files.txt -p "C:\Users\greg\Desktop\Motorised Bracket\PSoC\MB-01_Bootloadable.cydsn\MB-01_Bootloadable.cyprj" -d CY8C5888LTI-LP097 -s "C:\Users\greg\Desktop\Motorised Bracket\PSoC\MB-01_Bootloadable.cydsn\Generated_Source\PSoC5" -- -yv2 -q10 -ygs -o2 -v3 -.fftcfgtype=LE

Elaborating Design...

ADD: fit.M0032: warning: Clock Warning: (UART_IntClock's accuracy range '1.846 MHz +/- 5%, (1.754 MHz - 1.938 MHz)' is not within the specified tolerance range '1.843 MHz +/- 4.595%, (1.759 MHz - 1.928 MHz)'.).

* C:\Program Files (x86)\Cypress\PSoC Creator\4.1\PSoC Creator\psoc\content\CyComponentLibrary\CyComponentLibrary.cylib\UART_v2_50\UART_v2_50.cysch (Instance:IntClock)

* C:\Users\greg\Desktop\Motorised Bracket\PSoC\MB-01_Bootloadable.cydsn\MB-01_Bootloadable.cydwr (UART_IntClock)

ADD: fit.M0032: warning: Clock Warning: (RS485_IntClock's accuracy range '15 MHz +/- 5%, (14.25 MHz - 15.75 MHz)' is not within the specified tolerance range '14.746 MHz +/- 4.595%, (14.068 MHz - 15.423 MHz)'.).

* C:\Program Files (x86)\Cypress\PSoC Creator\4.1\PSoC Creator\psoc\content\CyComponentLibrary\CyComponentLibrary.cylib\UART_v2_50\UART_v2_50.cysch (Instance:IntClock)

* C:\Users\greg\Desktop\Motorised Bracket\PSoC\MB-01_Bootloadable.cydsn\MB-01_Bootloadable.cydwr (RS485_IntClock)

HDL Generation...

Synthesis...

Dependency Generation...

Cleanup...

Error: fit.M0050: The fitter aborted due to errors, please address all errors and rebuild. (App=cydsfit)

--------------- Build Failed: 01/10/2018 09:23:19 ---------------

--------------- Rebuild Started: 01/10/2018 09:23:30 Project: MB-01_Bootloadable, Configuration: ARM GCC 5.4-2016-q2-update Debug ---------------

Deleting file ".\CortexM3\ARM_GCC_541\Debug\main.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\powerstep_commands.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\cyfitter_cfg.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\cymetadata.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\CyScBoostClk.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\SPIM.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\SPIM_PM.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\SPIM_INT.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\UART.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\UART_PM.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\UART_INT.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\UART_BOOT.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\Clock_1.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\UART_IntClock.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\Cm3Start.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\CyBootAsmGnu.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\CyDmac.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\CyFlash.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\CyLib.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\cyPm.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\CySpc.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\cyutils.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\Up_Switch.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\Down_Switch.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\RS485.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\RS485_PM.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\RS485_INT.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\RS485_BOOT.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\RS485_IntClock.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\isr_RS485.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\Test_Pin.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\Status_Reg.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\timer_clock.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\Timer_1.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\Timer_1_PM.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\timer_clock_1.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\EZI2C.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\EZI2C_PM.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\EZI2C_INT.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\Timer_2.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\Timer_2_PM.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\SPIM_PV.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\SPIM_PV_PM.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\SPIM_PV_INT.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\SPIM_PV_IntClock.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\isr_SysTmr.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\Home_Switch.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\MOT_MISO.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\MOT_Reset.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\MOT_MOSI.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\MOT_SCK.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\MOT_SS.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\POS_DO.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\POS_PRE.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\POC_CLK.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\POS_ERR.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\MOT_LimSw.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\Rx_1.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\MOT_Busy.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\LED_Status.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\Pin_2.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\Config.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\EEPROM.o"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\MB-01_Bootloadable.hex"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\MB-01_Bootloadable.elf"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\MB-01_Bootloadable.map"

Deleting file ".\MB-01_Bootloadable.rpt"

Deleting file ".\MB-01_Bootloadable_timing.html"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\.deps\SOURCE_C__ARM_GCC_GENERIC.P"

Deleting file ".\CortexM3\ARM_GCC_541\Debug\.deps\SOURCE_ASM__ARM_GCC_GENERIC.P"

Build process unable to delete contents of code gen dir.  Error: Failed to delete C:\Users\greg\Desktop\Motorised Bracket\PSoC\MB-01_Bootloadable.cydsn\codegentemp\lcpsoc3: Access to the path 'C:\Users\greg\Desktop\Motorised Bracket\PSoC\MB-01_Bootloadable.cydsn\codegentemp\lcpsoc3' is denied.

--------------- Rebuild Failed: 01/10/2018 09:23:30 ---------------

Properties of the lcpsoc3 directory - shows read only

Unchecking read only and clicking apply results in the following message