PSoC™ Creator & Designer Forum Discussions
Hi Community,
I'm currently working with CapSense Touch Switch Application. I'm using CY8C4245AXI-483, CY8C4245LTI-M445 MCUs. I want to use an API with which I can Reset or give a Refresh to my Capacitive Touch application for a moment(lets assume for 2 seconds) and then the CapSense will be active again. The step or implementation I need is because sometimes my touch gets unresponsive until and unless I remove the power supply and give it back again.
I've came across a solution is to use "WDT Reset" as suggested by ChatGPT. But It'll simply restart my program, making it hard to debug the issue if some other issue hits my application.
I hope you understand my issue and Terms. If not please feel free to ask me more about it. I'll be happy to explain my issue.
Thanks and Regards,
Pankaj
Show LessHi Community, Im working on Touch switch Application based on CY8C4246LTI-M445. I have previously used CY8C4245-AXI and in its Capsense Component I was able to tune every single button's "Finger Threshold, Noise Threshold and so on", But with this one or Project, Im not able to Tune every single button.
I'll be attaching screenshot regarding this.
Additionally I have seen two different CapSense Components.
1. CapSense[v7.10]
2. CapSense CSD[v2.60]
If I drag 1st Component, It won't allow me to Set Finger Threshold for Each Button. It sets the value of Fing. Thre. Default to every button.
If I drag 2nd Component, It will allow me to select Finger Threshold to each button
Assistance is required for this. I hope the issue which I've posted is simple to understand. Let me know if you have some quries.
Thanks and Regards,
Pankaj
Show LessHello,
I have a project on PSoC 3 (CY8C3246PVI-147) that I would like to transport to PSoC 6 (CY8C6347BZI-BLD53), however, in the TopDesign of the project for PSoC 6 some components appear to be incompatible and I cannot find their counterparts in the component catalog. How can this be solved?
As a version of PDL I have 3.1.6 which I think is the latest most up-to-date.
Thank you very much
Show Less
Is there a direct method do download PSoC Creator 4.5?
After sleuthing around, I was able to find a link to PSoC Creator 4.4 from Download PSOC Creator which has a link to PSoC Creator 4.4 @ https://softwaretools.infineon.com/tools/com.ifx.tb.tool.psoccreator?_ga=2.75255953.2039974846.1648987897-92445194.1627360197
Other links to PSoC Creator appear to divert to ModusToolbox, which would be great if all PSoC devices were supported in ModusToolbox.
The Software Archive appears to have up to PSoC Creator 4.3. Missing are 4.4 and 4.5. Reference: https://www.infineon.com/cms/en/design-support/tools/tools-archive/psoc-creator-archive/#!?fileId=8ac78c8c7d507547017d52e3ea8803ff
Greg
Aside: I was NOT able to find PSoC Creator through Design Support. Reference https://www.infineon.com/cms/en/design-support/tools/sdk/psoc-software/psoc-creator/ which links to ModusToolbox.
Show Less
Hi Community,
I'm working on Touch Switch Application using CY8C4245-AXI Microcontroller. I already Created the Application for Single Touch Algorithm. It didn't created an Issue. Moving Ahead, I actually wants to Perform different task when Double Tapped on particular Touch Sensor.
On a conclusion, I'm about to use a Timer/Counter to actually implement a timeout for Double Tap.
I've a pseudo code for the same that I'll be sharing it Here. Please assist me with the best I can do to implement this on my Project.
Tons of Thanks to Beautiful & Active Community and Their Support
Show Less
I would like to hire someone to complete a client program to connect with a
server program I have working now. I am using PSoc4 and a CY8CKIT-042 pioneer kit.
Is this possible to get help with this project thru this platform? Should not take a long time for the right person.
David Hoffman
Hagenhoff LLC 330-477-3019
Show LessHello People helper
I have a problem with Update manager not appearing in "C:\Program Files (x86)\Cypress\PSoC Creator\4.4\" or in sub files Updater, at the same time i cannot find a Target in Debug->Select a Target function in the program. I have attached two pic to show also.
I have tried to follow another question but dindt help: https://community.infineon.com/t5/PSoC-Creator-Designer/Creator-4-4-Problem-with-update-manager-and-debug-target-Error-fmk-M0027/td-p/267022
Pls Help 🙂
Thomas
Ps
I can build a program though, but i have reinstalled the program 7-10 times allready due to other problems:(
Show LessHello im new to the PsoC Creator program, since summerbreak is over i have to learn how to use the UART with CY8CKIT-059, and when i create a new project and add UART to cysch file, i get the following errors when building (see attached pic), i dont if these erros come if i remove the UART from the cysch file, but if someone knows anything pls help
Show LessHi Community,
Recently I had an issue with my CY8C4245-AXI Controller on which I had Implemented a Project for CapSense(Basically Touch Switch). The problem is Switch gets turn on and off automatically(False Triggering) after some time. I referred to the CapSense Datasheet from CapSense Component. I want to know How can I use Calibartion API according to my Algorithm built.
PS: I have put Touch Threshold less sensitive according to the need of the Client.
Show Less
There is a recurring problem in customer base, need for a unique silicon die
ID for each chip. This is not a Device ID, as currently implemented. Something
akin to this
Would it be possible to implement thru programmer ? All PSOC Families ? Auto generated, say off a tax number, GPS
coordinates, or IP group number, something unique to the customer. Even a Cypress seed for those who are consultants,
the generated serial # stored in FLASH or EEPROM, and then protected as read only during programming.
Regards, Dana.
Show Less