PSoC™ Creator & Designer Forum Discussions

Is there any documentation about the functions (*.exe files in "Cypress\PSoC Creator\3.0\PSoC Creator\bin\") of PSOC Creator 3.0?

I want to use them eternally, but i need some information about the parameters (funktion inputs)

Regards

 Hi,

I am trying to debug a project I designed, using PSOC creator 3.0.

Can I debug my project on my PC (without using a board)?

thanks a lot,

Itamar.

I have a situation where I am trying to clock out an exact number of pulses from a design-wide clock to an I/O pin. (this is part of a hardware SWD block I'm designing.)  I am selecting the desired I/O pin with a demultiplexer and my first idea was to use a UDBClkEn block with a counter to gate the design-wide clock resource out to the physical pin.

Unfortunately this does not work, because the UDBClkEn block can only drive UDB clock input nets and since I am driving an I/O pin through a demux this obviously won't work.

I could drive a D FF but the output clock would be 1/2 of the desired clock. I could create a clock that is 2x the frequency of the design-wide clock but then I'm not guaranteed that it's synchronous. I could use a DDR block but PSoC doesn't have DDR primitives. I could just use an AND gate to gate the clock but now I have to worry about runt pulses.

What is the correct way to route a specific number of clock pulses from a design-wide clock resource through an I/O pin?

 Hello, 

Talking abou t the capsense CY3280-MBR3.

Anybody can help me to know, 

How  I can know Maximum distance from the proximity sensor and as I set in the program EZ-Click?

How thick the overlay may be it? 

Thanks, 

Regards.

 Hello, good afternoon.

Can you help me with a easy program to do  for PSoc Creator for  Cap Sense CY3280-MBR3. ? Please. 

Thanks, 

Regards. 

Hi,somebody in cypress,

 I want to know what is the difference between the CY8CKIT-049-42xx PSoC 4 Prototyping Kit and the PSoC 4 Pioneering Kit.I am using the PSoC 4 Prototyping Kit and I am repeating the exact same steps in the PSoC Creator 101 Lesson 4: Let's Get an LED to Blink Part 1 and part2 (exept the kit) ,but I still can't control the blue led.I thought that the reason may be the kit.So thats why I am asking the difference between kits,I would also like to know how to put my project into my kit.Thanks!

Please write back,

Godspeed

Hi every one !

I'm looking for create an analog switch similar to CD4066 but  with 8 switches.

Have some of you idea how to do that with PSoc3 ?

Thank you very much

 Hi,

I have a problem getting the TCPWM quadrature detector to work. it's not counting !

I have used a quadrature detector in the past, UDB based and the app worked without any problems, only after replacing it with a more resource-smart alternative I cannot seem to make it work.

The automatically generated API within psoc creator does look different, but I only require the Start() and readCounter() calls...

1. the TCPWM based solution does not count, the read results always in 0... what am I doing wrong?
2. Asuming I can make it work with other (more) API calls....Why does a simple replacement of the detector implementation
    requires me to change the API anyway.... apart from the namechange of the readCounter method (GetCounter()) it simple      
    should work, that's the promise of a good API, right?

the attachment shows the schematic, inputs (p1[0], p1[1]) -> glitch filter (4us) -> TCPWM QD (x1, A+B=level, no interrupt)

    QuadDec_2_Start();

    CyGlobalIntEnable;

    for(;;)

    {

        sprintf(uart_tx_buffer, "%d", (uint16) QuadDec_2_ReadCounter() );

        txstring(uart_tx_buffer);

        txchar('\r');

        txchar('\n');

        CyDelay(100);              
    }

After changing back to the UDB implementation it works as expected, but consumes a lot of valuable resources on my PSoC4 (4245). I'm using latest version of PSoC creator, all updates ok etc...

Anybody run into this issue before?  any help very welcome ! 

// and yes it i'm using the UDB implementation the glitch filter could be moved inside... but i require glitch-free signals from A-input for other parts (not shown) of the design... 😉