PSoC™ Creator & Designer Forum Discussions

Hello,

   Can anyone tell me how to build circuit in PsoC Creator 4.0 like attached. When I build this circuit in PsoC Creator I see in Resource Meter that UDB usage is 0, so I think program is simplifying circuit to nothing, but in fact this circuit should generate pulses.

Thanks, Piotr.

I have really enjoyed using the PSoC Creator schematic editor!  It makes setting up systems a lot easier.

I have a request, is this the place for them?

My request is that the CAN RX buffer configuration window provides the ability to set the Acceptance Mask Register (and maybe also the Acceptance Code Register).  If I am understanding correctly, the AMR register should allow a mailbox to receive messages for IDs within a range instead of a single ID.  At the moment it seems this can only be done in firmware.

Thanks!

I use a PSoC 5LP board for course requirements at my university.I used PSoC creator 3.1 and it was working okay,then I decided to upgrade to PSoC creator 4.0 and it worked for a few days,but,now every time I open PSoC creator  the program freezes title bar says 'Not Responding' and stays the same.

I use Win 8.1, 6Gb RAM

What should I do?

Thank you,

Sachintha Weerasinghe

I am working on PSOC 5LP kit. I am trying to implement an ADC , first I followed this link (https://eewiki.net/display/microcontroller/Utilizing+Analog+Peripherals+on+the+PSOC+5LP). But in this when i am working on Delsig ADC, even though the input is zero i am getting an output of 0.29V. I couldn't understand the reason behind that (but i thought this is because of Vref). SAR ADC is working fine. What is the reason and how to solve it. 

Thanks

Hi,

I've got a strange problem with the Find-function in PSoC Creator4.0. Its hard to explain. For example: If I want to find the word "for", the "auto complete function" jumps to my last word i have searched beginning with "f", then "o" and "r".  It seems like the delaytime to type words before the "auto complete function" activates is zero. I hope you understand what I mean. Can anybody help?

thanks a lot

Hi

 I can not download "PSoC Creator Eclipse Import v2.3.1.zip (Luna, Mars)" in "http://www.cypress.com/products/psoc-creator-integrated-design-environment-ide".

 At the same time I installed the old version "PSoC Creator Eclipse Import ", 

 But I can not click "Next" or "Finish" in the attachment.

   BR

 Thank you.

Hello community, I am a PSoC beginner and want to start with the PSoc Creator 4.0 software. So I installed PSoC Creator 4.0 Update 1 (typical) on the 4th PC. OS: Win 10 home. (German) Processor: I5-7200 RAM: 4 GB SSD The software I have registered, checked "i'd like to help ..." and Level 3 . Then I created a new project. Under Target Device, I have selected PSoC 4200 because I want to use the CY8CKIT-049-42xx. After that, I chose an empty schematic and waited until the project was created. Then I drag 'n drop an AND gate on the emty schematic. After this I only moved the gate and the software freezes and reported " no response" in the title bar. After 15 seconds the software was operable again. I come to the conclusion that the software does not work properly on four PCs now. It is a pity because I would have liked to know the functionalities of the PSoCs. After 3 weeks trying and serching for solutions it is (on four different PCs) not possible to work with PSoC Creator 4.0 ?!? Someone has an idea what could be the cause? For me it is not comprehensible! Many thanks in advance best regards Andreas

Hi All,

I have a custom device, which uses Raspberry PI 3 internally , which in turn uses BCM43438 module for bluetooth.

I need to do RF testing on the device(wifi and bluetooth) for the regulatory certifications. I'm unable to fix bluetooth to work on a single frequency. Could anyone suggest how this can be done?

I have found this documentation for TI chips - http://processors.wiki.ti.com/index.php/CC256x_FCC_Testing_Guide#Example_1:_Continuous_Wave_.28CW.29.2C_Channel_0_.282.402GHz.29.2C_Power_Level_15.C2.A0

Is anyone aware of commands that can be used to achieve this on BCM43438?

Appreciate your time.

Thanks!

When I use PSoC Creator 4.0.1 programming, often pop-up "Assertion failed"! dialog box, especially  the macro definition.

Hi,

I would like to stream numerically generated audio tone from PSoC to PC as USB stereo audio. I am looking for an example project that shows how to setup USB and stream stereo audio. Any pointers to a template project preferably with PSoC 5LP, would be very helpful.

Thanks!