When chose digital signal for IMO oscilation source,
Frequency item in Digital-Signal-Box never can enter.
If this can't do, other signal can't determine the frequency.
(This is happen on Creator 2.2SP1 and Creator 2.1)
Solved! Go to Solution.
WHAT are you talking about??? (Looking extremely flabbergasted)
Increasing WHICH number of bits???
I think he is talking about the control register setting.
He increased the number of bits in the configuration tab, so can modified the lower number bits. and then set the number of bits to the correct number.(the configuration box cannot be seen now, but the value was entered).
Another good feature. Other micros, you destroy a pin, the funtion is gone. With PSoC, just use another pin. still have the function, 🙂
So the digital signal bug you're talking about I cannot reproduce. If you remove and re-add the digital signal, are you still not able to specify a frequency?
As for the control register, it appears to be a bug with the configuration dialog based on DPI settings. For a temporary work around, lower your DPI setting in Windows to 96 DPI.
Hi Scott-san "Konnitiwa"
Degital Signal issue was resolve.
It was my misunderstanding.
I can set degital signal as follows.
1) Set degital input pin and set a wire name for identify.
2) Push upper right [...] button, and set frequency to the wire.
Very easy, Thank you.
Setting dialog [click to enlarge]