cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC Creator & Designer Software

New Contributor

Does the PSoC Creator allow for reading the image in a device (cy7c64215) and have any ability to dis-assemble the code?

0 Likes
Reply
1 Solution
Moderator
Moderator

Hi,

You can use PSoC Programmer to read flash from the encore III device. Please download PSoC Programmer GUI from the link below. Also, please refer PSoC programmer user guide.

https://www.cypress.com/documentation/software-and-drivers/psoc-programmer-archive

https://www.cypress.com/documentation/other-resources/psoc-programmer-user-guide

To read flash from the PSoC Programmer GUI, you need Miniprog 3 device and also one connector as below:

https://www.cypress.com/documentation/development-kitsboards/cy8ckit-002-psoc-miniprog3-program-and-...

https://www.cypress.com/documentation/other-resources/cy3655-plg

Hope the above information helps ! Else, please reply.

Thanks

Ganesh

View solution in original post

0 Likes
Reply
2 Replies
Moderator
Moderator

Hi,

You can use PSoC Programmer to read flash from the encore III device. Please download PSoC Programmer GUI from the link below. Also, please refer PSoC programmer user guide.

https://www.cypress.com/documentation/software-and-drivers/psoc-programmer-archive

https://www.cypress.com/documentation/other-resources/psoc-programmer-user-guide

To read flash from the PSoC Programmer GUI, you need Miniprog 3 device and also one connector as below:

https://www.cypress.com/documentation/development-kitsboards/cy8ckit-002-psoc-miniprog3-program-and-...

https://www.cypress.com/documentation/other-resources/cy3655-plg

Hope the above information helps ! Else, please reply.

Thanks

Ganesh

View solution in original post

0 Likes
Reply
Moderator
Moderator

Hi,

Please go through the following KBA for other programming options.

Can I program enCoRe III through the USB connector just like enCoRe II?

Thanks

Ganesh

0 Likes
Reply