cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC Creator & Designer Software

Contributor

Hi All,

I am creating a new design variant of a working project targeted for the 222014-01 BLE module by copying a working project that was targeted for the 222005 module, changing its name and using Device Selector to choose the new module type.

After doing this, I get three errors during the fitting stage:

ScGr_289066_0-1610380949587.png

To make matters worse, I've seen this error before but I cannot remember how I fixed it.  I have tried updating the components (BLE was updated to 3.66 and cy_boot to 5.90), but this hasn't eliminated the errors.

The error message suggests how to fix the problem but I can't find where one sets the "User provided" option.

 

Thanks,

Scott

 

 

0 Likes
Reply
1 Reply
Moderator
Moderator

Hello @ScGr_289066 ,

From the error, it looks like an error associated with the WDT. The following KBA should be helpful: https://community.cypress.com/t5/Knowledge-Base-Articles/Configuration-of-Watchdog-Timer-Interrupt-i...

Hope this helps 🙂

Regards,
Dheeraj

0 Likes
Reply