PSoC™ 6 Forum Discussions
Hello team,
How fast is the AMUXBUS switching compared to using SARMUX?
Regards,
Randhir
Hello,
I have attached a project. The problem that I am having is that all the LEDs work at the same time when I just want one LED to light at a time. Can anyone help please?
Kind regards,
Show LessDoes the disabling or freeing of the TRNG help reduce power consumption?
I wasn't able to find a value in the datasheet indicating how much power the TRNG consumes. Is there a nominal power consumption value that can be used to determine if it is better to be enabling/disabling the TRNG for each 32-bit value or if it would be better to generate multiple 32-byte values in succession without disabling the TRNG after each one.
The example, "Cryptograhpy_TRNG_Demonstration" for PSoC 63 in ModusToolbox appears to be enabling/disabling the True Random Number Generator (TRNG) for each operation.
/* Initialize the TRNG generator block*/
result = cyhal_trng_init(&trng_obj);
if (result == CY_RSLT_SUCCESS)
{
......
/* Free the TRNG generator block */
cyhal_trng_free(&trng_obj);
}
If my understanding of how the TRNG within the PSoC 6 works is incorrect, what information is available that may improve my understanding? I did find good information in both the PSoC 63 Architecture and Register TRMs. https://documentation.infineon.com/html/psoc6/zrs1651212645947.html
Also Reference: PSoC 6 TRNG Health Monitor
Greg
Show LessThank you
I am trying to upload various projects to my CYSBSYSKIT-01 dev board, yet none of my uploads seem to be successful because the UART output always shows it is running the AnyCloud Example: MQTT client.
I realized the KitProg version was out of date, so I used the fw-loader to upgrade the device to KitProg3. However I am still seeing the above output no matter what project I upload.
ModusToolbox seems to show the firmware being uploaded successfully.
Does anyone know what the problem could be? I'm wondering if I have just purchased an obsolete dev board. If that is the case can I use an older version of Modus Toolbox or an equivalent IDE?
Hi all,
I just integrated a Graphic LCD ( IL9488 FlexColor driver + emWin Library ) with PSoC6 WiFi-BT 062 Pioneer EVK. Additionally i would like to integrate a resistive touch panel to the same. But it seems there is no component available for "resistive touch" in PSoC Creator.
Can anyone help me to proceed with this?
The touch controller is TSC2003. I have selected the emWin PDL version with touch support. (Pls see the attached image)
Show Less
Hi,
I'm looking for a PSoC61 example that has the BSP and linker script.
I know that there are many PSoC62 examples, but I couldn't find any PSoC61 example. I wouldn't worry much, but PSoC61 doesn't have the Cortex M0+.
So, is they only thing that I need to change is the linker script? Is there any example of the PSoC61 linker script?
Thanks!
Show LessHi
我这边在MTB生成了Bluetooth_LE_Find_Me例程,通过阅读例程的README,扫描其中的二维码无法获取CySmart app,请提供下载链接,谢谢。
Hello Sir/Madam, could you please help me know some basic information of CYBLE-416045-02 module
1. What components are included in this module?
(1) PSOC 63 (2) crystal oscillators (3) passive components (4) Antenna (5) ?
2. Is PSOC 63 a single silicon chip with CPU, memory, ADC, and BLE included?
3. Is the power amplifier for BLE also included in PSOC 63 chip?
4. Are there RF filters for the BLE in the CYBLE-416045-02 module or PSOC 63 chip?
Thank you very much.
Show LessHello,
I designed a board around the CY8C6144LQI-S4F92 MCU. I found the QFN package difficult to solder by hand so I'm looking for a QFP replacement for the next revision. Specifically, I need the following specs:
- 1 USB-FS interface
- 3x I2C lines
- 24x GPIO
- 2x ADC chan
- 5x DAC chan
- 3.3V operation
I found that the CY8C614AAZI-S2F44 is a QFP part with these specs currently in stock on Arrow. I looked at it on the device configurator in ModusToolbox and it seems to have all the specs I need. Would this be a valid replacement for the current part I'm using or are there some gotcha's I'm not seeing?
Thanks,
Sam Shersher
Show Less