PSoC™ 6 Forum Discussions

I am trying to read the ADC values of 2 pins, and there are other pins which am using for other purposes, i want all the pins to be initialized and ADC to work. But my ADC pins are not initializing, But all the other pins are initialized successfully. I want all the pins to be working simultaneously.  I have attached the code please refer it.

Am using the CY8C6245LQI-S3D72 BSP.

1、I am  using  CY8C6244LQI-S4D82 now

2、I  want to encrypt the  program  to prevent theft 

你好 我现在用的  CY8C6244LQI-S4D82  ，如果 其他人 盗取     芯片程序，然后 反编译，有什么措施来防止这些吗 ？

不胜感激

Hello,

I have installed the latest version of the ModusToolbox and try to create a "New Application".

Usually I should get a list of kits for selecting the one I want to use. But unfortunately the process stops with the following error message:

Loading the manifest data
Found environment variable CyManifestLocOverride=C:/Users/unitj001/.modustoolbox/manifest.loc
Loading super manfiest files from all sources
Getting manifests from remote and/or local sources
Processing system manifest 'https://modustoolbox.infineon.com/manifests/mtb-super-manifest/v2.X/mtb-super-manifest-fv2.xml'
Downloading super manifest file 'https://modustoolbox.infineon.com/manifests/mtb-super-manifest/v2.X/mtb-super-manifest-fv2.xml'
Finished loading super manifest files from all sources
Finished download of file 'https://modustoolbox.infineon.com/manifests/mtb-super-manifest/v2.X/mtb-super-manifest-fv2.xml'
Starting to parse super manifest with URL 'https://modustoolbox.infineon.com/manifests/mtb-super-manifest/v2.X/mtb-super-manifest-fv2.xml'
Finished parsing super manifest with URL 'https://modustoolbox.infineon.com/manifests/mtb-super-manifest/v2.X/mtb-super-manifest-fv2.xml'
Downloading manifest file 'https://github.com/Infineon/mtb-ce-manifest/raw/v2.X/mtb-ce-manifest.xml'
Downloading manifest file 'https://github.com/Infineon/mtb-ce-manifest/raw/v2.X/mtb-ce-manifest-fv2.xml'
...
Finished download of file 'https://github.com/memfault/mtb-memfault-mw-manifest/raw/main/mtb-memfault-mw-manifest-fv2.xml'
Finished download of file 'https://github.com/sensiml/sensiml-mw-manifest/raw/main/sensiml-mw-manifest-fv2.xml'
Finished loading the manifest data (2133 ms)
Loading the device db
fatal: unable to access 'https://github.com/Infineon/device-db/': error setting certificate verify locations: CAfile: /etc/pki/tls/certs/ca-bundle.crt CApath: none
INFO:Using the executable path for the tools directory.
ERROR:there was an error retreiving the asset 'https://github.com/Infineon/device-db' commit 'release-v4.3.0' - fatal: unable to access 'https://github.com/Infineon/device-db/': error setting certificate verify locations: CAfile: /etc/pki/tls/certs/ca-bundle.crt CApath: none
ERROR:Global asset download of device-db loading completed with error.
ERROR:The asyncStepComplete failed for LoadFlag DEVICE_DB.
3 error(s), 0 warning(s)

I think that I followed the installation guide correctly.

I've set the environment variables like this:

The different directories do exist, but the manifest.loc file does not.

The problem occurs with and without VPN connection on my company notebook (Windows 10).
I don't have any problems on my private notebook (Windows 11).

Is there anything else I should check?

Hello,

just wanted to let cypress/infineon and the community know that there is an linker/makefile-config mismatch of the CY_CORTEX_M4_APPL_ADDR which leads to a crash / not starting of the CM4 core. 

In contrast to definitions of the other boards, the following directory lacks a COMPONENT_CM4/*/linker.ld file, so that the default of FLASH_CM0P_SIZE of 0x20000 is used:

https://github.com/Infineon/mtb-example-psoc6-dual-cpu-empty-app/tree/master/templates/TARGET_CY8CPROTO-063-BLE

The Makefile in proj_cm0p/Makefile states:

DEFINES+=CY_CORTEX_M4_APPL_ADDR=CY_FLASH_BASE+0x4400U

so the CORTEX_M4_APPL_ADDR is calculated wrong ( it should be 0x20000U).

https://github.com/Infineon/mtb-example-psoc6-dual-cpu-empty-app/blob/master/proj_cm0p/Makefile

It took me some time to find this bug. I hope it will be corrected soon by adding a COMPONENT_CM4/*/linker.ld file to the git.

Greetings,

 Matthias

Hi. I'm trying to compile a project for the PSoC6. I use mtb concpetion and modustoolbox version 3. I listed the external repo that I need in my project using the mtb files. For example, CoreHTTP library.

After using make getlibs command all the dependency are ready for me to be compiled. When I issue make build command it starts to compile the project. It seems it generates compile_commands.json and then proceed it to compile. CoreHTTP library contains the directory test that is unit tests actually for this library and I don't need to compile these source files in this test directory.

So my question is how to avoid this behaviour and point somehow to the compilation process that I don't need to proceed this files in the test directory?

Hello, 

I'm developing SPI slave today.  The hardware  is no CS pin, only MOSI and CLK. And the function only send data from the SPI master to the SPI slave,  one single slave. May I ask how to configure the driver in this case, or whether such a function can be realized?

Best regards,

Forward.

Dear all,

the PSoC6 has a 5.6 kOhm pull-down resistor. I was wondering if this one can be used as the R2 in a voltage divider to enable a 5V analog input. Calculating a proper R1 value leads to 2.8 kOhm.

Why I would like to use the pull-down resistor? because I would like to use 16 input channels and saving resistors would be great.

The real question is. Would it work? If I programm the pins as analog inputs with pull-down resistors, are they set to this setting from power up? Anything else might destroy the pins right?

Any help is welcome.